BROTHER CS10s
A computerised sewing machine with 40 stitches, including 5 buttonhole types. The screen shows the selected stitch, its length and width and the presser foot to use, and a needle threader is built in (for needles 75/11–100/16).
The machine has a carry handle. You insert the bobbin from the top after opening the bobbin cover. Remove the accessory compartment to get a free arm, onto which you can slide the item you are sewing. The accessory compartment (slide it to the left to open) can hold presser feet, bobbins and needles; Brother recommends putting them in a plastic bag so they do not fall out. The needle plate is marked with guides for sewing straight seams.
Features
40 stitches and 5 buttonhole types
Choose from utility and decorative stitches: straight and stretch stitches, zigzag, overcasting, blind hems, patchwork, decorative and satin stitches. There is also a stitch that imitates hand quilting (more about it in the Stitches section).
There are 5 buttonhole types: a narrow rounded one and a narrow squared one (for light and medium-weight fabrics), a stretch buttonhole (for stretch and woven fabrics), a heirloom buttonhole (for heirloom and stretch fabrics) and a keyhole buttonhole (for heavyweight or thick fabrics and larger flat buttons). You sew buttonholes with buttonhole foot “A”: put the button in the button guide plate of the foot to set the buttonhole length (button diameter + thickness; maximum buttonhole length about 28 mm). On stretch fabrics, buttonholes are sewn with an extra thread (gimp). After sewing, insert a pin just inside one bar tack so you do not cut the stitching, then cut towards the pin with the seam ripper to open the buttonhole. For keyhole buttonholes, make the round hole with the eyelet punch (not included), then open the buttonhole with the seam ripper.
LCD screen and stitch settings
The screen shows the number of the selected stitch, the presser foot to use, stitch length and width in millimetres, the needle stop position and single or twin needle mode. You change the stitch, its length and its width with separate keys next to the screen. When you select a stitch, the machine suggests a recommended length and width, which you can change.
Stitch length can be set up to 5 mm and stitch width up to 7 mm. The stitch numbers are printed on the machine body.
Needle threader
The built-in needle threader helps you thread the needle. Numbers printed on the machine body show the thread path. The threader can be used only with home sewing machine needles 75/11–100/16; it cannot be used to thread decorative threads, twin needles or wing needles.
Bobbin and winding
Wind thread onto the bobbin with the built-in bobbin winder. Insert the bobbin from the top after opening the bobbin cover. The machine uses a Class 15 bobbin, 11.5 mm high.
More features
Reverse button
- With a straight (00, 01) or zigzag (04) stitch selected, holding down the reverse/reinforcement stitch button sews backwards.
- With other stitches, pressing the button sews 3 to 5 reinforcement stitches in the same place.
- Use it to secure the start and end of a seam.
Speed control
- You control the sewing speed with the foot controller.
- The maximum speed can be set to standard or slower (see “Additional sewing settings”).
Thread tension
- You adjust the thread tension with the dial.
Thread cutter
- When you finish a seam, cut the threads with the thread cutter on the machine.
Lowering the feed dogs
- A switch at the rear of the machine, on the base, lowers the feed dogs.
- With the feed dogs lowered and button fitting foot “M” attached, you can sew on buttons.
Sewing light
- When you switch the machine on, the screen and the sewing light come on.
Maintenance
- The user must not oil the machine: it was lubricated at the factory with the right amount of oil, so periodic oiling is not needed.
- Unplug the machine before cleaning; clean the bobbin case area with the brush and do not oil it.
- If the handwheel is hard to turn or the machine makes an unusual noise, contact a service centre.
- Do not clean the bobbin case area with compressed air.
Additional sewing settings
You can change these settings by holding down the matching key while you switch the machine on. The settings are kept when the machine is switched off.
- Needle stop position: lowered (in the fabric) or raised
- Initial needle position when switched on: left or centre
- Automatic reverse / reinforcement stitching: on or off
- Maximum sewing speed: standard or slower
- Single or twin needle mode. The twin needle is not included: use the twin needle made for this machine (part number X59296-121) with zigzag foot “J” and a stitch width of 5 mm or less. Thread it by hand; the needle threader cannot be used. The second spool needs the extra spool pin XG3488-001, which is not included. The twin needle can only be used with the stitches marked in the official stitch chart: 00–05, 08, 11–18, 20, 21 and 37–39. If you select an unsuitable stitch, an error message appears.
Stitches
The machine has 40 stitches numbered 00–39: 00 and 01 are straight stitches (needle at the left or in the centre), 02 is a triple stretch stitch, 03 a stem stitch, 04 a zigzag, 05 a 3-step elastic zigzag, 06–08 overcasting stitches, 09 and 10 blind hem stitches (for woven and stretch fabrics), and 11–24 and 32–39 decorative stitches (including patchwork, cross and satin stitches).
Buttonholes are numbered 25–29, and the bar tack (for example, to reinforce a pocket opening) is no. 30. The stitch that imitates hand quilting is no. 31: sew it with transparent nylon thread on top and a thread matching the quilt in the bobbin, with a tight thread tension so that the bobbin thread shows on the right side of the fabric; use a needle between 90/14 and 100/16.
Each stitch has a presser foot assigned to it: “J” (zigzag foot) for straight stitches and most utility and decorative stitches (00–05, 08, 11, 12, 14–18, 20, 31), “G” for overcasting (06, 07), “R” for blind hem (09, 10), “N” for satin, hemstitching and other decorative stitches (13, 19, 21–24, 32–39), “A” for buttonholes and the bar tack (25–30). With overcasting foot “G” use only the stitches intended for it, otherwise the needle may hit the presser foot.
The twin needle can be used with stitches 00–05, 08, 11–18, 20, 21, 37–39. Use it with zigzag foot “J” and the twin needle mode, even if the table shows another presser foot (see the “Additional sewing settings” section).
For the blind hem stitches (09, 10), the width value is not in millimetres (default value 0, setting range −3 to 3).
The names, presser feet and default stitch width and length of all stitches are listed in the table below (default values according to the official Brother stitch chart; you can change them with the keys next to the screen). Presser foot letters are given as shown in the Brother stitch chart.
All 40 stitches
| No. | Stitch | Foot | Default width / length, mm | Twin needle |
|---|---|---|---|---|
| 00 | Straight stitch (left needle position) | J | 0.0 / 2.5 | yes (foot “J”) |
| 01 | Straight stitch (middle needle position) | J | 3.5 / 2.5 | yes (foot “J”) |
| 02 | Triple stretch stitch | J | 0.0 / 2.5 | yes (foot “J”) |
| 03 | Stem stitch | J | 1.0 / 2.5 | yes (foot “J”) |
| 04 | Zigzag stitch | J | 3.5 / 1.4 | yes (foot “J”) |
| 05 | 3-step elastic zigzag stitch | J | 5.0 / 1.0 | yes (foot “J”) |
| 06 | Overcasting stitch (light and medium weight fabrics) | G | 3.5 / 2.0 | – |
| 07 | Overcasting stitch (heavyweight fabric) | G | 5.0 / 2.5 | – |
| 08 | Overcasting stitch (reinforced seaming of stretch fabric) | J | 5.0 / 2.5 | yes (foot “J”) |
| 09 | Blind hem stitch (hemming woven fabrics) | R | 0 (not mm) / 2.0 | – |
| 10 | Blind hem stretch stitch (hemming stretch fabric) | R | 0 (not mm) / 2.0 | – |
| 11 | Blanket stitch (appliqués, decorative blanket stitch) | J | 3.5 / 2.5 | yes (foot “J”) |
| 12 | Shell tuck edge stitch | J | 4.0 / 2.5 | yes (foot “J”) |
| 13 | Satin scallop stitch (decorating blouse collars and handkerchief edges) | N | 5.0 / 0.5 | yes (foot “J”) |
| 14 | Patchwork join stitch | J | 4.0 / 1.2 | yes (foot “J”) |
| 15 | Patchwork double overlock stitch | J | 5.0 / 2.5 | yes (foot “J”) |
| 16 | Couching stitch (decorative stitching, attaching cord) | J | 5.0 / 1.2 | yes (foot “J”) |
| 17 | Feather stitch (fagoting, decorative stitching) | J | 5.0 / 2.5 | yes (foot “J”) |
| 18 | Fagoting cross stitch | J | 5.0 / 2.5 | yes (foot “J”) |
| 19 | Ladder stitch | N | 4.0 / 3.0 | – |
| 20 | Rick-rack stitch | J | 4.0 / 2.5 | yes (foot “J”) |
| 21 | Serpentine stitch (decorative stitching and attaching elastic) | N | 5.0 / 1.0 | yes (foot “J”) |
| 22 | Hemstitching (decorative hems, lace attaching pin stitch) | N | 3.5 / 2.5 | – |
| 23 | Hemstitching (daisy stitch) | N | 6.0 / 3.0 | – |
| 24 | Hemstitching (decorative hemming on thin, medium weight and plain weave fabrics, heirloom stitching) | N | 5.0 / 4.0 | – |
| 25 | Narrow rounded buttonhole stitch | A | 5.0 / 0.5 | – |
| 26 | Narrow squared buttonhole stitch | A | 5.0 / 0.5 | – |
| 27 | Stretch buttonhole stitch | A | 6.0 / 1.0 | – |
| 28 | Heirloom buttonhole stitch | A | 6.0 / 1.5 | – |
| 29 | Keyhole buttonhole stitch | A | 7.0 / 0.5 | – |
| 30 | Bar tack stitch (reinforcement at a pocket opening, etc.) | A | 2.0 / 0.4 | – |
| 31 | Hand-look quilting stitch | J | 0.0 / 2.5 | – |
| 32 | Decorative stitch | N | 7.0 / 2.5 | – |
| 33 | Decorative stitch | N | 7.0 / 2.0 | – |
| 34 | Decorative stitch | N | 7.0 / 2.5 | – |
| 35 | Cross-stitch | N | 6.0 / 2.5 | – |
| 36 | Cross-stitch | N | 6.0 / 1.4 | – |
| 37 | Satin stitch | N | 7.0 / 0.4 | yes (foot “J”) |
| 38 | Satin stitch | N | 7.0 / 0.4 | yes (foot “J”) |
| 39 | Satin stitch | N | 7.0 / 0.4 | yes (foot “J”) |
Fabrics, threads and needles
| Fabric or use | Thread | Needle | Stitch length |
|---|---|---|---|
| Lightweight fabrics (lawn, georgette, organdy, crepe, chiffon, voile, gauze, tulle, lining, etc.) | Polyester thread: No. 60–90. Cotton and silk thread: No. 50–80 | 65/9–75/11 | fine stitches, 1.8–2.5 mm |
| Medium-weight fabrics (taffeta, gabardine, flannel, linen, terry cloth, poplin, satin, quilting cotton, etc.) | Polyester thread: No. 60–90. Cotton and silk thread: No. 50–60 | 75/11–90/14 | regular stitches, 2.0–3.0 mm |
| Heavyweight fabrics (denim of 12 ounces or more, canvas, etc.) | Polyester and cotton thread: No. 30 | 100/16 | coarse stitches, 2.5–4.0 mm |
| Heavyweight fabrics (denim of 12 ounces or more, canvas, tweed, corduroy, velour, melton wool, vinyl-coated fabric, etc.) | Polyester thread: No. 60. Cotton and silk thread: No. 30–50 | 90/14–100/16 | coarse stitches, 2.5–4.0 mm |
| Stretch fabrics (jersey, tricot, T-shirt fabric, fleece, interlock, etc.) | Polyester, cotton and silk thread: No. 50 | ball point needle 75/11–90/14 | set according to the fabric thickness |
| Top-stitching | Polyester and cotton thread: No. 30 | 90/14–100/16 | set according to the fabric thickness |
| Top-stitching | Polyester and cotton thread: No. 50–60 | 75/11–90/14 | set according to the fabric thickness |
| Any fabric | transparent nylon thread | home sewing machine top-stitching needle | – |
Video
Official video about this model from Brother SewingCraft Europe.
Technical specifications
| Type | Computerised sewing machine |
|---|---|
| Number of stitches | 40, including 5 buttonhole types |
| Display | LCD |
| Stitch length | up to 5 mm |
| Stitch width | up to 7 mm |
| Adjustment ranges | Straight stitches 00 and 01: stitch length 0.2–5.0 mm, width 0.0–7.0 mm; for all other stitches the length is 4.0 mm at most (the limits for each stitch are in the official stitch chart) |
| Maximum buttonhole length | about 28 mm (button diameter + thickness) |
| Twin needle | stitches 00–05, 08, 11–18, 20, 21, 37–39; zigzag foot “J”, stitch width up to 5 mm; needle X59296-121 and spool pin XG3488-001 are not included in the box |
| Bobbin | Class 15 type, 11.5 mm high (SFB: XA5539-151) |
| Needles | home sewing machine needles, sizes 65/9–100/16 |
| Recommended threads | 30–90 wt (according to the manual's table), silk 30–80 wt; thread of 20 wt or lower (heavier thread) must not be used |
| Needle threader | built in; only for home sewing machine needles 75/11–100/16; not for decorative threads, twin needles or wing needles |
| Thread tension | adjusted with a dial |
| Feed dogs | lowered with a switch at the rear of the machine (on the base) |
| Lighting | sewing light (comes on when the machine is switched on) |
| Free arm | yes (remove the accessory compartment) |
| Reverse | reverse / reinforcement stitch button |
| Bobbin winder | built in |
| Presser feet in the box | 7 (J, A, G, N, I, R, M) |
| Country of origin | Vietnam |
| Intended use | Household use (according to the Brother manual) |
| Warranty | 3 years |
In the box
In the box, according to the official Brother included-accessories sheet. In the figure: 1 – zigzag foot “J” (on the machine), 2 – buttonhole foot “A”, 3 – overcasting foot “G”, 4 – monogramming foot “N”, 5 – zipper foot “I”, 6 – blind stitch foot “R”, 7 – button fitting foot “M”, 8 – seam ripper, 9 – bobbins (4; one inserted in the machine), 10 – needle set (one each of 75/11, 90/14 and 100/16), 11 – ball point needle (gold coloured, 90/14), 12 – cleaning brush, 13 – L-shaped screwdriver, 14 – bobbin case (inserted in the machine), 15 – foot controller, 16 – dust cover, 17 – operation manual, 18 – quick reference guide.
- Zigzag foot “J” (on the machine)
- Zipper foot “I”
- Buttonhole foot “A”
- Overcasting foot “G”
- Monogramming foot “N”
- Blind stitch foot “R”
- Button fitting foot “M”
- Foot controller
- L-shaped screwdriver
- Bobbins, 4 pcs (SFB; one inserted in the machine)
- Bobbin case (inserted in the machine)
- Seam ripper
- Cleaning brush
- Needle set (75/11, 90/14, 100/16)
- Ball point needle (gold coloured, 90/14)
- Dust cover
- Operation manual and quick reference guide
Optional accessories (not included in the box)
List compiled from the Brother operation manual and the Brother support page section 'Consumables & Options' for this model.
- Seam accuracy kit FP01
- Decorative edge presser foot kit FP02
- Patchwork presser foot kit FP03
- Creative Sewing Pack CSP2 (5 presser feet)
- Wide table WT17
- Bobbins and bobbin clips (BCL)
- Bobbins, 10 pcs (SFB)
- Twin needle (2/11) X59296-121
- Extra spool pin XG3488-001
- Eyelet punch XG7791-001 (for keyhole buttonholes)
- Adjustable zipper/piping foot F036N
- Blind stitch foot F017N (adjustable, for blind hems on a variety of fabrics)
- Concealed zipper foot F004N (for easy installation of concealed zippers)
- Edge joining foot F056
- Narrow hemmer foot F002N
- Non-stick foot F007N
- Picot foot F039N
- Piping foot F067
- Roller foot F066
- Side cutter F054
- Stitch guide foot F035N
- Stitch in the ditch foot F065
- Straight stitch foot F042N (needle in the centre position)
- Vertical stitching alignment foot F063
- Zigzag foot with levelling button F053
- Narrow zipper foot F079
- Concealed zipper foot F080 (for sewing in concealed zippers)
- Adjustable binder foot F071 (bias tape 5–20 mm wide)
- Binding foot F014N
- Braiding foot F021N
- Clear-view foot F023N
- Cording foot F013N (up to 3 cords)
- Cording foot, 5-hole F019N
- Cording foot, 7-hole F020N
- Fringe foot F025N
- Gathering foot F012N
- Open toe foot (metal) F060
- Open toe foot F027N
- Pearls and sequins foot F028N
- Pin tuck foot, 5 grooves F069
- Pin tuck foot, 7 grooves F058
- Bi-level feet, right and left (F081 and F082)
- 1/4-inch patchwork foot F001N
- 1/4-inch patchwork foot with guide F057
- Quilting guide F016N
- Open toe quilting foot F061
- Quilting foot F005N
- Walking foot F033N (only for straight and zigzag stitches; do not sew reverse stitches with it)
- Open toe walking foot F062
- Free motion guide grip FMG2
- Dynamic walking foot set F085
- Interchangeable toe set for dynamic walking foot F086
Manuals
- User manuals (Brother support website)Link
- Operation manual (PDF, English)PDF
- Quick reference guide (PDF, English, Spanish, French and Portuguese)PDF
- Stitch chart for 40/50/60-stitch models (PDF)PDF
- Sewing guide (PDF, English)PDF
- Included accessories (PDF)PDF
- Optional accessories (Brother support website)Link
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this sewing machine is right for your work.