JACK JK-T9270-12-2PL
Industrial two-needle chainstitch sewing machine with a U-shaped arm. Designed for workwear, jeans and other garments.
The machine sews with two needles: two parallel seams are visible on the top side of the fabric and two chainstitch seams on the underside. By removing one needle, you can sew a single-needle straight chainstitch seam.
The rear external puller, working from above and below, effortlessly feeds workwear and jeans seams of any thickness. Chainstitch seams are strong, durable and resistant to stretching and other loads.
U-shaped arm
The U-shaped arm makes it easy to carry out complex operations and to sew in hard-to-reach places, such as sleeves or trouser hems.
Table and motor
The machine is supplied with a specially designed table and a motor. You can choose a single-phase 400 W clutch motor or a new-generation 550 W servo motor.
The servo motor lets you set the required sewing speed and has needle positioning – the needle always stops in the chosen position, up or down.
Photos
Specifications
| Maximum sewing speed | up to 3000 stitches/min |
|---|---|
| Maximum stitch length | up to 4.2 mm |
| Standard needle gauge | 6.4 mm |
| Needle gauge with conversion kit | 8.0 mm |
| Feed | external toothed puller, top and bottom |
| Arm | U-shaped, for hard-to-reach places (sleeves, trouser hems, etc.) |
| Motor | single-phase 400 W clutch or 550 W servo |
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this sewing machine is right for your work.