The JACK A2C-C is a versatile automated industrial lockstitch sewing machine for light, medium and heavier fabrics.
The machine trims the threads and positions the needle by itself. The A2C-C series uses solutions developed by German engineers, and the design was created by German designers.
A 550 W servo motor built into the head drives the machine shaft directly, without a belt drive. As a result, the machine runs quietly and without vibration, starts sewing smoothly without a jolt, and is easy to control when sewing complex parts. The motor only runs when the pedal is pressed, so the machine is also suitable for use at home or in rooms where a low noise level matters.
UAB „Siuvimo manija“ is the authorised official distributor of JACK sewing machines in Lithuania.
Features
- Updated design
- New-generation quiet brushless servo motor integrated into the head, needle positioning (the needle stops in the up or down position, as selected) and speed setting
- Integrated control board. If needed, it can be quickly replaced or repaired; the motor is also easy to replace, as it is held by just a few screws
- Convenient control panel
- Integrated LED lighting of the work area
- Newly designed stitch length regulator with a lock
- Improved lubrication system
- Powder-coated surface that resists abrasion, so the machine keeps its appearance for a long time
Specifications
| Maximum sewing speed | up to 5000 stitches/min |
|---|---|
| Stitch length | up to 5 mm |
| Presser foot lift height | 6/13 mm |
| Motor | integrated quiet, vibration-free servo motor, 550 W |
| Lubrication system | fully automatic |
| Thread trimming | automatic |
| Control panel | integrated |
| Work platform | enlarged |
| Lighting | LED |
| USB port | for connecting devices, e.g. charging a phone |
| Power consumption | up to 80% lower than with a clutch motor |
Sewing
The machine sews a wide range of fabrics with ease.
Table
As standard, the machine comes with an original JACK table with adjustable legs and no castors. The tabletop measures 120 × 55 × 4 cm, and the height of the table frame is adjustable.
For the price with a different configuration, write to info@siuvimomanija.lt.
Optional extras
- Table castorsThe castors shown in the photo are not included as standard.25 €
Documents and videos
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this sewing machine is right for your work.