JACK C4-6-03/333
JACK C4-6-03/333 is a high-speed, fully automated industrial overlocker with thread trimming. It overcasts with three, four, five or six threads, depending on the number of needles.
By removing or inserting a needle, you can quickly adapt the overlocker to the fabric you are sewing. This version can perform any type of edge overcasting.
The machine comes with an original servo motor: it runs quietly and uses up to 80 % less electricity than older clutch motors. Sewing speed is up to 7000 stitches/min.
The overlocker can be supplied with two types of table: a standard one or a sunken one, where the machine is mounted inside the table and the sewing platform is level with the tabletop.
Features
Control panel in the body
A new-generation control panel built into the machine body.
Needle bar system that does not stain fabrics
A special needle bar system does not stain fabrics with oil.
New shaft design
The improved shaft ensures smoother and quieter machine operation.
Stitch samples
Specifications
| Automation | programming, thread trimming, presser foot lift |
|---|---|
| Motor | built-in new-generation servo motor |
| Maximum sewing speed | 7000 stitches/min |
| Number of threads | 3, 4, 5 or 6, depending on the version |
| Needle type | DCx27 |
| Differential feed range | 0.7–1.65 |
| Lubrication | central lubrication system |
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this overlocker is right for your work.