JACK JK-T9820G-01-D/P
Description
Electronic high-speed eyelet buttonhole machine JACK JK-T9820G-01-D/P. Designed for buttonholes on coats, suits, workwear, jeans, trousers and school uniforms.
The buttonhole is sewn with three threads, with a gimp thread laid on top. The needle and bobbin threads are trimmed short automatically, so no manual trimming is needed.
If any problem arises, the computer activates the emergency stop circuit and the machine stops immediately.
Speed1000–2500 stitches/min.
Sewing length14–42 mm
Zigzag widthUsually 3–4 mm, maximum 5 mm
MotorAC servo, 550 W
Head weight120 kg
Specifications
| Needle thread trimming | short |
|---|---|
| Bobbin thread trimming | short |
| Application | jeans, trousers, suits, dresses, casual wear |
| Sewing length | 22–30 mm, 14–22 mm, 18–26 mm, 26–34 mm, 34–42 mm |
| Standard clamp foot length | 30/26 mm |
| Standard cutter length | 24/20 mm |
| Optional cutter length | 28/24 mm |
| Sewing speed | 1000–2500 stitches/min. |
| Needle code | 0.5–2.0 mm |
| Needle system | DDx55B, NM 80–120 |
| Zigzag width | usually 3.0–4.0 mm, maximum 5.0 mm |
| "Stream" thread length | 0–20 mm |
| Clamp frame height | 16 mm |
| Start | double pedal switch |
| Fabric feed | intermittent, by 3 stepper motors (X, Y) |
| Upper shaft motor | AC servo motor, 550 W |
| Air pressure | main regulator 0.5 MPa, cutter pressure regulator 0.4 MPa |
| Air consumption | 43.2 l/min. (8 cycles per minute) |
| Weight | head 120 kg, control panel 0.6 kg, control box 14.2–16.2 kg |
| Dimensions | 123 mm × 83 mm × 144 mm |
| Power supply | single-phase 100 V / 200 V or three-phase 200 V / 220 V / 380 V / 400 V; 400 VA |
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this buttonhole machine is right for your work.