JACK K5-UT-01GB
Instalment calculator – external content.
Cookie settingsInstalment calculator – external content.
Cookie settings
An industrial cylinder-bed five-thread coverstitch machine with top cover stitching. Designed mainly for sewing knits, especially sleeves and other narrow parts.
The JACK K5-UT-01GB is a fully automatic high-speed machine: it trims the threads and lifts the presser foot by itself. It has a built-in economical servo motor, a needle positioning system and LED lighting of the work area.
The cylinder bed makes it easy to sew sleeves and other narrow items. The machine sews several types of seams: a three-needle five-thread seam with or without top cover, wide and narrow two-needle seams with or without top cover, and a straight chain stitch. The fabric feed is adjusted by the differential mechanism.
The machine is well built and works efficiently, smoothly and quietly, without vibration even at high speed. The lubrication system has been improved, and the body is powder coated, so it lasts longer.

Features
Small-diameter cylinder bed
The cylinder bed diameter is 270 mm. It is convenient for sewing both very small and large parts.
Convenient stitch length adjustment
The stitch length is set simply by moving a lever.

Silicone thread lubrication system for three needles
Control panel on the machine head
The built-in panel makes operating the machine quick and convenient.
Patented lower looper threading system
Threading the lower looper is simple and quick.
Needle guard
The adjustable needle stability system helps produce neater seams and protects the needles from bending and breaking.
Differential feed control
The fabric feed range is easy to adjust for all sewing options. Moving the lever lets you gather or additionally stretch the knit being sewn.
The bed can be extended to a standard one
The narrow cylinder bed is convenient for hard-to-reach areas: sleeves, trouser hems, children's clothing. When needed, additional parts can be attached in a few minutes, turning it into a standard bed.
New-generation servo motor (Direct drive)
Compared with old-generation clutch motors: quiet operation, beltless drive, high speed, less vibration, soft start, quick stop, needle positioning and up to 80% lower electricity consumption.
Stitch samples
Specifications
| Motor | Built-in new-generation servo motor |
|---|---|
| Needle positioning | Yes |
| Lighting | LED work area lighting |
| Bed | Cylinder |
| Automation | Trimming of all threads, presser foot lift |
| Differential range | 0.8–1.3 mm |
| Stitch length | 1.5–4.5 mm |
| Presser foot lift height | 7 mm |
| Lubrication | Automatic central lubrication system |
| Maximum sewing speed | 5500 stitches/min |
| Needle spacing | Standard 5.6 mm (6.4 mm also available) |
| Needle system | UY128GAS 11–14# |
| Needles / threads | 3 needles, 5 threads |
From the manufacturer leaflet
High productivity
- Normal working speed is 4500 stitches/min versus 3700 on a normal interlock; the manufacturer states 21 % higher efficiency.
One main shaft
- The patented single-shaft design reduces torque, so the machine sews fast, stably and lasts longer.
One-key reset
- One key restores your own or the factory parameters.
Documents
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this sewing machine is right for your work.
