JACK E4S-6-03/333
Instalment calculator – external content.
Cookie settingsInstalment calculator – external content.
Cookie settings
A six-thread, three-needle industrial overlocker for plain seaming. The light, medium or heavy fabric mode is selected on the control panel.
The JACK E4S-6-03/333 is suitable for a very wide range of fabrics, so sewing workshops and clothing repair shops do not need to keep several different overlockers. The machine stands out with its distinctive design and high sewing speed.
UAB Siuvimo manija is the only authorised distributor of JACK sewing machines in Lithuania.

Features
High sewing speed
The maximum sewing speed is 5500 stitches/min., one of the highest for this type of machine. This reflects a sturdy build and high productivity.
Integrated servo motor
The new-generation original servo motor runs very quietly and uses up to 80% less electricity than old-style clutch motors.
Needle bar system
A special needle bar system does not stain fabrics with oil.
New-generation shaft design
The machine runs more smoothly and quietly.
Table
The overlocker can be supplied with a standard or a recessed table. In a recessed table the machine is mounted inside the table so that the sewing plate is level with the tabletop.
A table with castors is available for an additional 25 €.
Specifications
| Motor | integrated new-generation servo motor |
|---|---|
| Maximum sewing speed | 5500 stitches/min. |
| Stitches | 6-thread seam (3 needles) |
| Needle type | DCx27 #11 |
| Differential feed | 0.7–2 |
| Lubrication system | central |
| Number of needles | 3 |
| Needle gauge | 3 × 2 mm |
| Stitch width | 4 mm |
| Stitch length | up to 4 mm |
| Presser foot lift | 5 mm |
| Packed size | 525 × 360 × 510 mm |
| Weight (net / gross) | 28 / 36 kg |
From the manufacturer brochure
Light, medium and heavy modes
- One of three modes is selected on the panel: A – light and mesh fabrics, M – medium fabrics (knitwear), H – heavy fabrics (denim).
Quick start and brake
- According to the manufacturer, start and brake response is 40–50 % shorter than on other direct-drive overlockers.
Clean sewing
- A sealed oil suction and return device in the needle bar and an oil seal on the feed bar prevent oil leakage.
One-key reset
- Settings are restored with one key, and the software can be updated quickly through the interface.
One main shaft design
- Lower machine torque – the machine runs more stably and lasts longer.
Documents
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this overlocker is right for your work.
