JACK C4-6-03/333
Instalment calculator – external content.
Cookie settingsInstalment calculator – external content.
Cookie settings
JACK C4-6-03/333 is a high-speed, fully automated industrial overlocker with thread trimming. This is the six-thread, three-needle version designed for plain seaming.
The machine comes with an original servo motor: it runs quietly and uses up to 80 % less electricity than older clutch motors. Sewing speed is up to 7000 stitches/min.
The overlocker can be supplied with two types of table: a standard one or a sunken one, where the machine is mounted inside the table and the sewing platform is level with the tabletop.

Features

Control panel in the body
A new-generation control panel built into the machine body.

Needle bar system that does not stain fabrics
A special needle bar system does not stain fabrics with oil.

New shaft design
The improved shaft ensures smoother and quieter machine operation.
Specifications
| Automation | programming, thread trimming, presser foot lift |
|---|---|
| Motor | built-in new-generation servo motor |
| Maximum sewing speed | 7000 stitches/min |
| Number of threads | 6 (3 needles) |
| Needle type | DCx27 #11 |
| Differential feed range | 0.7–2 |
| Lubrication | central lubrication system |
| Needle gauge | 3 × 2 mm |
| Stitch width | 4 mm |
| Stitch length | up to 3.8 mm |
| Presser foot lift | 5 mm |
| Packed size | 525 × 360 × 510 mm |
| Weight (net / gross) | 33 / 41 kg |
From the manufacturer leaflet

Voice guide and one-key reset
The panel gives voice alarms (e.g. presser foot open) and suggests what to do. One key restores the user or factory settings.

Sealed oil system
The needle bar and oil supply system are fully enclosed to avoid oil leakage.
Three operating modes
- Fully intelligent – the machine works without the pedal; computerized – automatic sensor, presser foot lifter and thread trimming; semi-intelligent – the machine works according to the operator.
Documents
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this overlocker is right for your work.
