ELNA eXtend easycover V2
Recommended accessories for this machine (24)
-
Accessory box - large37.00 € -
-
-
Binding attachment ELNA 202-404-000139.00 € -
Binding attachment ELNA 795-838-114139.00 € -
Binding attachment Elna 795-844-032139.00 € -
Centre guide foot21.00 € -
-
Clear coverstitch foot35.00 € -
-
-
-
elna bobbin1.00 € -
Extension table 29.5 x 20.5 cm39.00 € -
Lint brush4.00 € -
-
Needle set - JANOME-ELNA mix6.00 € -
-
-
Screwdriver - small4.00 € -
Screwdriver – thin4.00 € -
Seam ripper4.00 € -
Tweezers4.00 € -
A three-needle, four-thread coverstitch machine for knits from a Swiss manufacturer, made for home use. It sews a straight chain stitch, wide and narrow two-needle coverstitches and a three-needle coverstitch.
The machine is suitable for a variety of knitwear, for attaching decorative details and for sewing elastic and binding tape.
The work area is large and the sleeve platform can be removed. Threading the lower looper is easy, and there are presser foot pressure, stitch length and differential feed dials. The STS reinforced stitch system pulls the looper thread tighter, making the seam stronger and neater. A stitch selection chart is shown on the front panel.
Features
Thread stand for spools of any size
The built-in thread stand takes spools of any size, even industrial cones. You can use the same threads on both your overlocker and your coverstitch machine.
Stable construction
Heavy, stable construction with a fully metal inner frame. The machine runs quietly and smoothly.
Stitch selection information
The front panel shows how to select stitches.
Binding with attachments
With the optional binding attachments you can neatly finish the fabric edge with tape.
Fine and thick fabrics
A special switch lets you adjust the thread tension to the thickness of the fabric.
Large work area and removable platform
The work area is almost the same as on industrial machines. When sewing sleeves or other hard-to-reach areas, the free arm platform can be removed.
Thread cutter
When you finish sewing, lift the fabric at the cutter and cut all the threads in one movement.
Easy threading
Both the needles and the looper are easy to thread – the looper swings out. Each thread is colour coded.
New fabric feed system
Newly designed feed dogs move the fabric evenly.
Specifications
| Number of operations | 14 |
|---|---|
| Frame | inner, fully metal |
| Reinforced stitch system | STS |
| Work area | 143 × 100 (width × height) |
| Table | removable |
| Maximum sewing speed | up to 1000 stitches/min |
| Stitch length | up to 4 mm |
| Stitch width | 3–6 mm |
| Dials | presser foot pressure, differential feed |
| Looper | single, swings out for easy threading |
| Threading | colour coding of each thread |
| Weight | 8.1 kg |
| Warranty | 3 years |
| Country of manufacture | Switzerland |
What's included
Optional extras
- Binding attachment 32 mm to 8 mmCode 795-838-114.139 €
- Binding attachment 42 mm to 12 mmCode 795-844-032.139 €
Elastic attachmentCode 795-816-116 – for elastic from 6.0 to 8.5 mm; code 795-817-117 – for elastic from 10.0 to 12.00 mm.35 €
Clear footCode 795-817-117.35 €
Foot with guide for joining two fabricsCode 795-819-119.35 €
Ruler guideCode 795-806-113.25 €
Extension table to enlarge the work areaCode 795-818-118.39 €
Clear foot with edge guideCode 796-402-004.25 €
Hemming attachmentCode 795-839-115.89 €
Documents
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this coverstitch machine is right for your work.