JACK C5T-5-A04/435

Price 1,650.00 €
Choose table legs *
Worktable extension module *
Choose table type *
Pay in instalments with Inbank

Instalment calculator – external content.

Cookie settings
Pay in instalments with Artea

Instalment calculator – external content.

Cookie settings
Brand
JACK
Product code
C5T-5-A04/435
Warranty
24 months
Description

Industrial high-speed five-thread overlocker with top fabric feed, automatic thread trimming and presser foot lifting.

C5T series overlockers have a top and bottom fabric feed system, so fabric layers do not shift. Depending on the version, overlockers in the series finish edges with three, four, five or six threads; this model is a five-thread version (2 needles) made for denim.

The integrated new-generation servo motor runs very quietly and uses up to 80 % less electricity than old-style clutch motors. The overlocker can be supplied with a standard or a recessed table – in the latter case the sewing platform is level with the tabletop.

JACK C5T overlocker
SpeedUp to 6000 stitches/min
Number of threads5
NeedlesDCx27
Differential feed0.8–1.5

Features

Control panel in the housing

Control panel in the housing

New-generation control panel integrated into the machine housing.

Needle bar that keeps oil off fabric

A special needle bar system prevents oil from getting onto the fabric.

New shaft design

The machine runs even more smoothly and quietly.

Stitch samples

5-thread stitch
5-thread stitch

Specifications

  • Fully automated: programming, thread trimming, presser foot lifting
  • Top and bottom fabric feed system
  • Integrated new-generation servo motor
  • Maximum sewing speed 6000 stitches/min
  • Number of threads: 5 (2 needles, 5 mm gauge)
  • Needle type DCx27 #19
  • Differential feed range 0.8–1.5
  • Central lubrication system

From the manufacturer leaflet

Top and bottom differential feed

Top and bottom differential feed

The top and bottom feed move the fabric together, so the upper and lower layers of long pieces do not shift or distort.

Strong feeding of heavy materials

Strong feeding of heavy materials

750 W motor and a new transmission design – the machine sews smoothly over cross seams and ridges. According to the manufacturer, coral velvet is sewn in 4 layers normally and 6 layers over a ridge.

Higher presser foot lift – 7 mm

Higher presser foot lift – 7 mm

Thick fabrics such as cotton garments or down jackets are easy to place under the foot.

Voice guide and three working modes

Voice guide and three working modes

The control panel gives voice reminders and helps solve common faults. One key switches between fully automatic, semi-automatic and computerized mode.

Other C5T series features

Mesh fabric mode

Mesh fabric mode

A mode for thin and see-through fabrics, so the sensor does not start the machine by mistake.

Fourth sensor – shorter thread chain

Fourth sensor – shorter thread chain

An additional sensor detects the fabric end more precisely, leaving a thread chain of about 5 mm (typically about 15 mm).

Fast acceleration and stopping

Fast acceleration and stopping

The machine reaches 5500 rpm in about 0.1 s and stops in about 0.18 s.

Technical data

Application (manufacturer table)jeans exclusive
Needles / threads2 needles, 5 threads
Needle systemDCx27 #19
Needle gauge5 mm
Overedge width6 mm
Stitch lengthup to 5 mm
Differential feed ratio0.8–1.5
Presser foot lift7 mm
Maximum speed6000 stitches/min
Motor750 W, integrated
Packed size505 × 360 × 565 mm
Weight (head net / gross)29.2 / 39.8 kg

Documents

Work table extension module (+25 €)

This fold-out module enlarges the work table. You can choose it when ordering the product.

Any questions?

Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this overlocker is right for your work.

Visit our shop in Kaunas

Over 30 years of advice, sewing equipment and repairs.

+370 685 85915
Kleboniškio g. 18-1, LT-44104 Kaunas
info@siuvimomanija.lt

Advice and service

We help you choose equipment and accessories and arrange warranty and post-warranty repairs.

Contact us

Embroidery services

About embroidery