BROTHER PR1060W
A semi-professional 10-needle embroidery machine for small businesses. The embroidery area is 360 × 200 mm and the speed is up to 1000 stitches/min.
In the Brother operation manual and on the Brother websites the machine is called PR1060W; the US website calls it “Entrepreneur Pro W PR1060W” and the leaflet calls it “Entrepreneur PR1060W”. It is the same machine. It is for embroidery only.
The embroidery area is 360 × 200 mm, so a large design can be embroidered without repositioning the fabric in the hoop. The machine has 1184 designs, 50 fonts and a 3D font, which you can preview and edit on the 10.1-inch touchscreen.
The built-in camera helps you position a design accurately on the fabric. The machine has 10 needles with individual settings, and the thread is cut automatically at the end of each colour. A tubular frame table is also in the box.
Features
Large embroidery area and hoops
The maximum embroidery area is 360 × 200 mm. The box includes 4 hoops: 360 × 200, 180 × 130, 100 × 100 and 60 × 40 mm.
The optional Jumbo hoop PRPJF360 extends the embroidery area to 360 × 360 mm. Designs for it must be created in PE-DESIGN NEXT or a later version, and the software automatically divides the design into 2 sections that are combined into a single embroidery. A design of up to 350 × 350 mm can be embroidered without shifting the fabric within the hoop – after the first section is embroidered, the hoop is removed, turned around and attached again. The wide table PRWT1 must be used with the Jumbo hoop, and such designs cannot be saved in the machine's memory. Position the fabric in the hoop so that there is at least 10 mm of space to the inside of the hoop.
The speed range is 400 to 1000 stitches/min. According to the manual, the maximum is 600 stitches/min. with some hoops. The Brother Europe website says the speed can be reduced to 400 stitches/min. for flat items and for the optional cap and cylinder frames, and that the machine reaches 1000 stitches/min. in 7 seconds.
Built-in camera and positioning
The built-in camera shows the embroidery area live on the screen. Mark the spot on the fabric with chalk, attach the hoop, touch the camera key and move the design with the position keys until the chalk mark shows in the camera view window. You can rotate the design parallel to the chalk mark, show the needle drop point, adjust the image brightness (darker for light fabric, lighter for dark fabric), zoom the camera view and save the camera image to an external device.
The design can also be positioned with an embroidery positioning sticker. The box includes 4 sticker sheets, and a pack of 8 sheets, EPS2 (XG6749-001), is sold separately. Affix the sticker so that the centre of the large circle is aligned with the centre of the design; the camera detects it, you select a reference point (the Brother Europe website lists 9 options) and the hoop moves into position. Remove the sticker before embroidering. Test the removal on a scrap of fabric first, and if the sticker cannot be detected, secure its 4 corners with tape.
According to the manual, the camera cannot align the position when the optional holder D, holder E, a cap frame or a cylinder frame is installed. For fabric thicker than 2 mm, switch [Fabric Thickness Check] to ON in the settings so that the machine measures the thickness; otherwise the fabric may not be detected correctly, and the needle may break when fabric thicker than 2 mm is embroidered. Leave the setting OFF for light to medium-weight fabrics.
Matrix Copy and shortcut key
Select a design and touch the matrix key in the design editing screen: the repeated design is positioned across the whole area. Specify the hoop size and adjust the spacing – it can be widened or tightened. Each time the key is pressed, the layout is recalculated automatically.
After a design is selected, the shortcut key skips the design editing and embroidery settings screens.
10 needles with individual settings
For each needle you can set a maximum speed (400 stitches/min. for metallic thread), reserve the needle bar and colour, and disable the automatic needle threader (the Brother Europe website says this is useful with thin needles). A temporary needle bar lets you use a needle bar that is already threaded with a similar colour.
With the normal method, colours can be assigned to up to 9 needle bars; with [Manual Color Sequence] on (off at purchase) all 10 can be used. This is useful for data without thread colour information, such as DST, and when you use the same colour combination every time. The settings stay until the design is deleted or the machine is turned off, and the spool change prompt is unavailable in this mode.
If a design has 11 or more colours, the machine stops and shows which spools to change; an indicator also shows the time until the machine stops. A spool is easy to change: cut the thread between the spool and the thread guide, change the spool and tie the new thread end to the remaining end of the old thread.
The needle is threaded automatically, and the upper and bobbin threads are trimmed automatically.
Tubular frame table
The tubular frame table PRTT1 (D01FAF-001) is in the box, as stated in the addendum to the operation manual and on the Brother Europe website. It is for sleeves, trousers and other tubular items and gives extra support for big fabrics. The wide table PRWT1 is sold separately.
Attach the table so that the machine bed passes through the openings in the mounting brackets, and push it until it touches the machine. Extend the table to suit the hoop and fabric size so that the fabric does not hang down. Close the hook cover before attaching or removing the table.
Do not place heavy objects, such as golf bags, on the table or press down on it. Some tubular items with a small diameter, shallow depth or heavy weight may not be suitable, so check the embroidery area before embroidering. Do not leave the table extended when it is not in use. Clean the underside of the machine bed before use and remove dust from the rubber pads before storing the table. If the rubber pads stick, pull the table's arm down by hand and then remove the table.
Touchscreen and editing
The 10.1-inch high-resolution IPS LCD touchscreen has a wide viewing angle. A USB mouse can also be used (some mice may not be compatible).
Designs can be edited on the screen. With density-preserving resizing switched on, the machine recalculates the stitch density automatically, and depending on the design it can be enlarged by up to 200% or reduced to 60%. This function cannot be used with character, frame or repeated designs or large buttonhole designs, and designs with 100001 or more stitches cannot be resized while keeping the density. The display zoom is 100, 125, 150 or 200%.
On the screen you can rotate a pattern, flip it horizontally (mirror image), duplicate it, group patterns, add another pattern and combine several patterns into one embroidery. Undo and redo keys are available.
More features
Automatic hoop detection
- The machine automatically detects the attached embroidery hoop and its holder.
Thread sensors
- The machine has upper and bobbin thread sensors.
Vertical bobbin
- The bobbin is vertical, and according to the Brother website it can often be changed without removing the hoop.
- Only the bobbin case is installed at purchase; use prewound bobbins (Fil-Tec / TRU-SEW POLYESTER “Filaments”) or metal bobbins designed for this machine.
- Clean the bobbin case and check the bobbin thread tension at every change.
Adjustable LED lighting
- Built-in LED lighting with adjustable brightness (the Brother Europe website lists 5 LEDs).
Administrator and operator locks
- The machine can be locked with a passcode: the administrator lock uses a 6-digit passcode, and the operator lock (which locks the LCD screen) uses a 4-digit passcode.
Function key optimisation
- Choose which function keys are unavailable.
- One set of settings is kept on the machine, and a set can also be saved to a USB device and recalled.
- This function is not available in Link mode.
Resuming embroidery
- Embroidering can be resumed after the machine has been turned off or after a power loss; some stitches may be embroidered again.
- Cut the thread before turning off the machine.
Preview, basting and appliqué
- The machine has a stitch simulator and a progress bar.
- A basting outline can be added around the design (distance 0–12 mm, default 5 mm), and the appliqué function instantly creates an outline of the design.
Quilting
- According to the Brother Europe website, there are 20 quilting motifs, 26 decorative fills (stippling and echo stitching) and 5 two-colour sash designs.
- Auto-split sash designs can be up to 3000 × 3000 mm, and the camera helps to position continuous designs and sashes.
Colour management
- The colour sequence can be shuffled with 4 schemes (“Random”, “Vivid”, “Gradient” and “Soft”), and colours can be grouped.
- Colour sorting groups parts of the same colour together so the thread spool is changed as few times as possible; it does not work on overlapping designs.
- Individual colour sections of a design can be switched off, a multicolour design can be converted to a single colour, and you can create your own thread table.
My Design Center
- You can create your own designs from clip art, imported .jpg, .png and .bmp images or by drawing directly on the large screen; with the optional scan frame you can also scan line art printed on paper.
Lettering and text editing
- Text can be entered on several lines and aligned left, centre or right.
- Letter size can be chosen from 3 options (L, M, S), the spacing between letters can be changed and, once a letter is selected, its thread colour can be changed.
3D font with urethane foam
- According to the addendum to the operation manual, the 3D font is embroidered over urethane foam up to 3 mm thick.
- Cut the foam larger than the design and secure it with tape (not over the design); basting around the design secures the foam more firmly.
- Make the bobbin thread tighter and the upper thread looser.
- For caps Brother recommends the flat brim cap frame (sold separately).
Connecting designs with the camera
- The camera helps to connect several designs: the connecting area is 330 × 170 mm, and the 360 × 200 mm hoop is recommended.
- The function cannot be used with the 60 × 40 mm hoop, cap frames, the cylinder frame, the sleeve frame, clamp frames, the name frame or round frames, with split designs created in PE-DESIGN 7 or later, or in Link mode.
Link function
- Designs can be sent from a computer to several machines with software that has the Link function, such as PE-DESIGN NEXT or a later version.
- Up to 100 designs can be transferred to one machine, and the embroidery progress can be viewed on the computer.
- Up to 10 machines can be connected wirelessly (PE-DESIGN 11.2 or later is required) and up to 4 by USB cable.
- The function works only with .pes designs and is not suitable for split large designs.
Wireless connection and My Stitch Monitor
- Designs can be transferred wirelessly via PE-DESIGN 11 or Brother BE EmbroideryStudio.
- The My Stitch Monitor app (iOS and Android) shows the embroidery progress and alerts you when it is time to change the thread or when the embroidery is finished.
Thread trimming settings
- You can turn jump stitch trimming on or off, delete short stitches (0–1 mm) and select the thread tail length – standard or long (long suits metallic thread).
- Automatic lock stitches are switched on at purchase (this option can be turned off).
Thread tension
- According to the Brother Europe website, the machine has updated upper thread tension dials and a wider tension range, so lighter fabrics such as satin and organza pucker less.
Tutorial videos
- Scan the QR code shown on the screen with a mobile device to watch tutorial videos.
Maintenance
- According to the manual, oil the machine before first use; afterwards put a drop of oil on the hook once a day before use.
- Every 40–50 hours of embroidering, put one drop on each lower needle bar above the felt washer.
- Use only machine oil and do not over-oil; wipe off any excess with a rag.
- If the thread breaks while embroidering or the hook becomes noisy, oil the race hook.
- Unplug the machine before cleaning.
Hoops and hoop holders
| Hoop / frame | Embroidery area | Holder | Use |
|---|---|---|---|
| Extra-large hoop PRPH360 (included) | 360 × 200 mm | A (included) | For connected characters or patterns, combined patterns and large patterns |
| Large hoop PRH180 (included) | 180 × 130 mm | A (included) | For patterns smaller than 180 × 130 mm |
| Medium hoop PRH100 (included) | 100 × 100 mm | A (included) | For standard-sized patterns |
| Small hoop PRH60 (included) | 60 × 40 mm | A (included) | For small patterns such as name tags |
| Extra-large hoop PRH300 (optional) | 300 × 200 mm | A (holder included) | For connected characters or patterns, combined patterns and large patterns |
| Flat frame (optional) | 300 × 200 mm | A (holder included) | For jackets and other thick garments; the optional wide table is needed when embroidering |
| Quilt frame (optional) | 200 × 200 mm | B (holder included) | For pieces for quilts; the optional wide table is needed when embroidering |
| Border frame (optional) | 300 × 100 mm | B (holder included) | For long strings of characters or patterns; the optional wide table is needed when embroidering |
| Jumbo hoop (optional) | 360 × 360 mm | B (holder included) | For patterns split into 2 regions in PE-DESIGN (smaller than 200 × 360 mm) or patterns up to 350 × 350 mm; the optional wide table is needed when embroidering |
| Sleeve frame (optional) | 70 × 200 mm | B (holder included) | For long items such as shirt sleeves |
| Round frames (optional) | diameter 100, 130 or 160 mm | C (optional) | For adding a built-in design to a sleeve; choose the frame to suit the size of the design |
| Clamp frame S (optional) | 45 × 24 mm | D (optional) | For specially shaped items that cannot be held in normal frames, such as shoes and gloves |
| Clamp frame M (optional) | 100 × 100 mm | D (optional) | For specially shaped items, such as narrow bags |
| Compact frames (optional) | 70 × 41, 50 × 50, 44 × 38 and vertical 75 × 33 mm | E (optional) | For logos or designs on small items |
| Magnetic frame (optional) | 50 × 50 mm | E (optional) | To prevent the frame from leaving marks in the fabric |
| Versatile magnetic frames (optional) | 180 × 130 and 100 × 100 mm | F (optional) | A variety of fabrics can be secured in the frame easily and firmly |
| Cap frame (optional) | 130 × 60 mm | not used | For caps: baseball (golf) caps, tulip hats and bucket hats. Not suitable for hats with a front area of 50 mm or less, such as sun visors and children's hats, or hats with a brim longer than 80 mm |
| Flat brim cap frame (optional) | 130 × 60 mm | not used | For caps, including flat brim caps and children's caps; allows embroidering closer to the brim than the cap frame |
| Wide cap frame (optional) | 360 × 60 mm | not used | For caps; larger embroidery area than other cap frames. Not suitable for hats with a front area of 50 mm or less, or hats with a brim longer than 80 mm |
| Magnetic sash frame (optional) | 360 × 200 mm | not used | For connected characters or patterns, combined patterns and large patterns; the optional wide table is needed when embroidering |
| Cylinder frame (optional) | 90 × 80 mm | not used | For tubular and curved items such as shirt sleeves and turtlenecks |
Videos
Official videos about this model from Brother SewingCraft Europe.
Technical specifications
| Machine type | Embroidery-only machine: semi-professional, 10-needle, for small business use. Free arm embroidery machine: according to the Brother leaflet, the cylinder free arm makes it easier to embroider hard-to-reach areas such as caps, tote bags and sleeves and helps reduce fabric tangling |
|---|---|
| Number of needles | 10 |
| Maximum embroidery area | 360 × 200 mm (360 × 360 mm with the optional Jumbo hoop; maximum design size 350 × 350 mm) |
| Maximum embroidery speed | 1000 stitches/min. (depends on the hoop) |
| Speed range | 400–1000 stitches/min.; according to the manual, the maximum is 600 stitches/min. with some hoops |
| Built-in designs | 1184 |
| Lettering fonts | 50 and a 3D font |
| Frame patterns | 140 (10 shapes × 14 stitch types) |
| Monograms | 3 lettering styles and 15 monogram frames |
| Display | High-resolution IPS LCD touchscreen, 10.1 inch |
| Memory | 10 MB for designs; 100 MB for My Design Center images |
| File formats | .pes, .phc, .phx, .dst; My Design Center images – .jpg, .png, .bmp. .dst designs appear in the pattern list by file name only (the image is not shown) and, because they contain no thread colour information, they are shown with the default colour sequence: check the preview and change the colours as needed. Files not saved by Brother design software or by this machine may cause the machine to malfunction |
| Pattern storage and media | Patterns can be saved to the machine's memory or to USB media and loaded back from the machine's memory, USB media or a computer. A USB flash drive can be used for saving and loading; an external USB CD/DVD drive for loading only. With a USB card reader you can use SD, CompactFlash, Memory Stick, Smart Media, MMC and xD-Picture cards. Do not create folders in 'Removable Disk' on the computer: the machine cannot retrieve a pattern stored in a folder |
| Design limits | .pes design: up to 500000 stitches and up to 127 colour changes; size – up to 360 × 200 mm |
| Connections | USB (2 ports for media or a mouse and 1 port for a computer); wireless LAN (IEEE 802.11 n/g/b, 2.4 GHz; a wireless network cannot be set up with WPA/WPA2 Enterprise); computer operating systems – Windows 7, Windows 8.1, Windows 10 (according to the manual) |
| Computer software | PE-DESIGN NEXT or a later version – for the Link function and Jumbo hoop designs; PE-DESIGN 11.2 or a later version – for the Link function over a wireless connection |
| Hook | Vertical, fully rotary, normal size (Type L) |
| Needle | HA130EBBR, #11 (household embroidery needle); HAX 130 EBBR (Organ) is recommended by Brother, and Schmetz 130/705 H-E may be used as a substitute |
| Upper thread | Recommended threads: rayon or polyester machine embroidery thread, 120 den/2, 135 dtex/2, 40 weight (in the Americas and Europe; according to the manual). Certain types of thread may break or have improper tension; in that case change the thread. For metallic or other strong thread, use the included spool net; the tension may need adjusting |
| Bobbin | Use only prewound bobbins (Fil-Tec / TRU-SEW POLYESTER “Filaments”), XH3619-001, or metal bobbins designed for this machine. Bobbin case XC7206-001; check the bobbin thread tension at each change |
| Bobbin thread for winding | Winding requires the optional bobbin winder set PRBW1 and metal bobbins; wind with cotton or spun polyester thread (74 dtex/2 to 100 dtex/2) |
| Needle threading | Automatic; the automatic threader can be disabled for each needle |
| Maximum fabric thickness | 2 mm (the needle may break if thicker fabric is embroidered) |
| Thread tension | Manual |
| Thread sensors and trimming | Upper and bobbin thread sensors; automatic upper and bobbin thread trimming |
| Lighting | LED lighting with adjustable brightness (the Brother Europe website lists 5 LEDs) |
| Spool stand | For 10 spools |
| Energy saving | Eco Mode 10–120 min. (switches off the machine light and screen); Shutoff Support Mode 1–12 h (suspends all functions; after recovery an error message appears and the machine must be turned off and on) |
| Screen saver and video | Up to 5 JPEG images for the screen saver (each up to 2 MB); an MP4 video (up to 100 MB) can be played |
| Power consumption | 116 W (according to the Brother Europe website) |
| Dimensions (W × D × H) | 561 × 589 × 790 mm according to the operation manual (the Brother website gives 589 × 561 × 658 mm) |
| Free space around the machine | According to the manual's diagram: at least 50 mm behind the machine, more than 350 mm at the front and more than 210 and 220 mm at the sides |
| Weight | 41.8 kg |
| Setting up and moving | The machine should be lifted by 2 people holding it by the slots on the underside. Place it on a level table; the machine has 4 adjustable feet. Do not block the ventilation slots on the underside at the rear of the machine |
| Operating temperature | 5–40 °C |
| Country of origin | Taiwan |
| Warranty | 3 years (1 year for commercial use, according to Brother) |
In the box
In the box, according to the Brother operation manual and its addendum.
- Accessory case, XC6482-051
- Needle sets (2 pcs), XC6469-001
- Prewound bobbins (6 pcs), XH3619-001
- Spool nets (10 pcs), S34455-000
- Seam ripper, XF4967-001
- Scissors, XF2052-001
- Tweezers, XC6542-051
- Touch pen, XA9940-051
- Threader, XE8362-001
- Needle changing tool, XF0793-001
- Needle plate cover, XC6499-151
- Spacer (installed on the machine), XF1978-001
- Phillips screwdriver, XC6543-051
- Standard screwdriver, X55468-051
- Allen screwdriver, XC5159-051
- 3-way screwdriver, XH4670-001
- Wrench 13 mm × 10 mm, XC6159-051
- Oiler, D01H2N-001
- Cleaning brush, X59476-051
- Weight (L), XC5974-151
- USB cable clamps (2 pcs), XE8396-002
- Spool mats (10 pcs), XC7134-051
- Thread spool caps (10 pcs), 130012-057
- USB cable, XD1851-051
- Embroidery hoop PRPH360 (extra-large), 360 × 200 mm, XG6733-001
- Embroidery hoop PRH180 (large), 180 × 130 mm, XG6647-001
- Embroidery hoop PRH100 (medium), 100 × 100 mm, XG6649-001
- Embroidery hoop PRH60 (small), 60 × 40 mm, XG6651-001
- Embroidery sheet, 360 × 200 mm, XE7158-101
- Embroidery sheet, 180 × 130 mm, XC5721-051
- Embroidery sheet, 100 × 100 mm, XC5759-051
- Embroidery sheet, 60 × 40 mm, XC5761-051
- Embroidery positioning sticker sheets (4 pcs), XE4912-501
- Embroidery frame holder A (with white corner covers), XE7374-001
- Embroidery frame holder B (with light grey corner covers), XE7376-001
- Operation manual
- Quick reference guide
- Embroidery design guide
- Power cord
- Bobbin case (installed on the machine), XC7206-001
- Tubular frame table PRTT1, D01FAF-001 (according to the addendum to the operation manual and the Brother Europe website)
Optional accessories (not included in the box)
List compiled from the Brother operation manual and the Brother support page section 'Consumables & Options' for this model.
- Embroidery thread sets ETS12N (12 colours), ETS22N (22 colours) and ETS40N (40 colours) – 100 per cent polyester thread with a satin finish, No. 50
- Country embroidery thread sets CYT21 (21 colours) and CYT40 (40 colours), No. 60
- Embroidery stabilisers: BM3 – iron-on (28 × 100 cm, 3 pcs); BM5 – water soluble (28 × 300 cm, 1 pc); BM6 – water soluble, non-woven fabric (30 × 150 cm, 1 pc)
- Consumables kit PRCNSKIT1 – iron-on stabiliser, water-soluble stabiliser (non-woven fabric), needle set and a prewound bobbin
- Bobbin winder set PRBW1 and metal bobbin 100376-051
- Embroidery positioning sticker sheets (8 pcs), EPS2, XG6749-001
- Weight (S), XC6631-051
- Scan frame set PRSCANFKIT1 (XG8237-001) – for scanning line art printed on paper
- Wide table PRWT1 (XG6731-001) – required when embroidering with the Jumbo, border, quilt, flat and magnetic sash frames; according to the manual, also recommended with heavy frames and fabric so that the frame holder does not bend
- Embroidery stand VRPRNSTD (XG3199-001)
- Embroidery frame PRH300 (extra-large, 300 × 200 mm, XG6645-001) – for connected characters or patterns, combined patterns and large patterns
- Flat frame PRF300 (300 × 200 mm, XG6693-001) – for jackets and other thick garments
- Border frame PRPBF1 (300 × 100 mm, XG6729-001) – for long strings of characters or patterns
- Quilt frame PRPQF200 (200 × 200 mm, XG6727-001) – for pieces for quilts
- Jumbo frame PRPJF360 (360 × 360 mm, XE8405-301) – for designs that PE-DESIGN splits into 2 regions, and for designs up to 350 × 350 mm
- Sleeve frame PRHSL200 (70 × 200 mm, XG5284-001) – for long items such as shirt sleeves
- Round frames PRPRF100 (XG6737-001), PRPRF130 (XG6739-001) and PRPRF160 (XG6741-001) (diameter 100, 130 and 160 mm), set PRPRFK1 (XG6725-001); they need holder C PRPARMC (XG6743-001) – for adding a built-in design to a sleeve
- Clamp frames S PRCLP45B (45 × 24 mm, XF2251-001) and PRCLP45LR (45 × 24 mm, left and right, XF2255-001) – for specially shaped items that cannot be held in normal frames, such as shoes and gloves
- Clamp frame M set PRCLP100B (100 × 100 mm, XG6235-001) – for specially shaped items, such as narrow bags
- Compact frame set PRSFK1 (XG6209-001) – frames 70 × 41, 50 × 50, 44 × 38 mm and vertical 75 × 33 mm (also sold separately: VRSF70, VRSF50, VRSF44 and VRSFV) for logos or designs on small items
- Magnetic frame PRMF50 (50 × 50 mm, XG8597-001) and magnetic frame set PRMFA50 (XG8593-001) – to prevent the frame from leaving marks in the fabric; free-arm mounting jig PRMFJ1 for the magnetic or compact frame (cylindrical items)
- Cap frame set PRCF3 (XE2158-201) and the frame alone PRCFH3 (130 × 60 mm, XG6695-001) – for caps; not suitable for hats with a front area of 50 mm or less, or hats with a brim longer than 80 mm
- Mounting jig PRCFJ2 (XG6661-001) – for cap frames
- Wide cap frame set PRPCF1 (XE8408-201) and the frame alone PRPCFH4 (360 × 60 mm, XG6735-001) – for caps; larger embroidery area than other cap frames
- Flat brim cap frame set PRCF5 (D01FAB-001) and the frame alone PRCFH5 (130 × 60 mm, D01FA5-001) – for caps, including flat brim caps and children's caps; allows embroidering closer to the brim than PRCFH3
- Cylinder frame set PRCL1 (XG6697-001) and the frame alone PRCLH1 (90 × 80 mm, XG6699-001) – for tubular and curved items such as shirt sleeves and turtlenecks
- Magnetic sash frame PRMS360 (360 × 200 mm, D01FAN-001) – for connected characters or patterns, combined patterns and large patterns, and for quilt sash patterns
- Versatile magnetic frames PRVMFL (180 × 130 mm, D01XHM-001), PRVMFLKIT (180 × 130 mm, kit, D01XHD-001), PRVMFM (100 × 100 mm, D01XK7-001) and PRVMFMKIT (100 × 100 mm, kit, D01XJY-001) – a variety of fabrics can be secured in the frame easily and firmly; holder F is included in the M and L size kits
- Kits: Apparel PRAPRLKIT1 (sleeve frame, round frame set and tubular frame table), Monogram PRMNGRMKIT1 (clamp frame M set and compact frame set), Sports PRSPRTKIT1 (flat brim cap frame set, flat brim cap frame and clamp frame M set)
Manuals
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this embroidery machine is right for your work.