JACK JK-8740C-460-02-UTL-AW1S
Instalment calculator – external content.
Cookie settingsInstalment calculator – external content.
Cookie settings
The JACK JK-8740C-460-02-UTL-AW1S is an industrial automatic four-needle, six-thread cylinder-bed flatlock machine for knitwear with a top cover stitch.
The machine has an economical built-in servo motor, needle positioning, LED work area lighting, automatic thread trimming and automatic presser foot lift.
The fabric is fed along the arm (feed of the arm). The machine is suitable for sewing knitted underwear, swimsuits, neoprene diving suits and sportswear.

Features

Small cylinder bed
The cylinder bed has a circumference of only 150 mm, so the machine is suitable for sewing narrow tubes.

Automatic presser foot lift
An electric presser foot lifter is standard. The spring-type presser foot adapts well to a wide range of fabrics.

Pneumatic thread trimming (UTL)
A built-in photocell allows threads to be trimmed automatically at the start and end of the seam, and a suction device removes excess chain stitch.

Waste suction
Waste cut by the knife is sucked away, so the workplace stays clean and tidy.

Direct-drive motor
The quiet motor vibrates little and uses little energy. The machine is also safer and quicker to install.
From the manufacturer
Sealed machine head
- The machine head is sealed, so there is no oil leakage onto the fabric.
Two-way fabric cutting (02)
- In the model code, 02 stands for two-way cutting, UTL for the pneumatic thread trimmer and AW1S for pneumatic suction.
Specifications
| Needles and threads | 4 needles, 6 threads |
|---|---|
| Needle size | #11 |
| Needle gauge | 1.4–3.0 mm |
| Differential ratio | 1:0.6–1:1.5 |
| Presser foot lift | 6 mm |
| Maximum speed | 3200 stitches/min |
| Fabric cutting | two-way |
| Thread trimming | pneumatic |
| Waste suction | pneumatic |
| Weight (net / gross) | 45.9 / 61.7 kg |
Documents
Work table extension module (+25 €)
This fold-out module enlarges the work table. You can choose it when ordering the product.
Any questions?
Call +370 685 85915 or email info@siuvimomanija.lt. We will help you check whether this sewing machine is right for your work.
