JACK JK-T9820G-01-D/P
Kaina:
info@siuvimomanija.lt
Aprašymas
JACK JK-T9820G-01-D/P elektroninė kilpų siuvimo mašina atliekanti kilpas su akutėmis.
JACK JK-T9820G-01-D/P elektroninė kilpinė greitaeigė siuvimo mašina skirta paltinių, kostiuminių, darbo rūbų, džinsų, kelnių, mokyklinių uniformų sagų kilpų siuvimui.
Mašina kilpos apsiuvimą atlieką su viršutinių karkasiniu siūlo paklojimu naudodama tris siūlus.
MACHINE SPECIFICATIONS:
Needle Thread Trimmer: Short Thread Trim
Bobbin Thread Trimmer: Short Thread Trim
Main Applicaitons: Jeans, Trousers, Suits, Dresses, and Casual Clothing
Functions: Trimming both Needle (Upper) Thread and Bobbin (Lower) Threads. No manual trimming required.
Sewing Length: 22-30mm, 14-22mm, 18-26mm, 26-34mm, 34-42mm
Standard Presser Foot Length: 30/26mm
Standard Hammer Length: 24/20mm
Accessorial Hammer Length: 28/24mm
Sewing Speed: 1000 to 2500 Stitches per Minute
Needle Code: 0.5-2.0mm
Needle System:DDx55B NM: 80 to 120
Zig Zag Sewing Width: In most conditions, it is between 3.0mm to 4.0mm to 5.0mm at most
Stream Thread Length: 0mm to 20mm
Work Clamp Height: 16mm
Start-off Mode: Double Pedal Switch
Fabric Feeding Device: Interminnent Cloth-sending of 3 Pulse Motors (X,Y)
Safety Device: If there are any problems, the computer automatically actions the urgent stop circuit to stop the machine immediately.
Upper Shaft Motor: WAC Servo-motor 550W
Air Pressure: Main Regulator 0.5 MPa, Hammer Pressure Regulator 0.4 MPa
Air Consumption Volume: 43.2 Liters per Minute (8 Cycles/Minute)
Weights: Machine Head = 120 Kg, Operation Board = 0.6 Kg, Control Box = 14.2-16.2 Kg
Dimensions: 123mm x 83mm x 144mm
Power: Single Phase 100V/200V or Three Phases 200V/220V/380V/400V or 400VA